Izopak F-2 Fibro Glass Supported Bituminous Isolation Membrane
Bitumen Isolation Water Isolation Membrane Technical Details
F-2 bituminous Isolation membranes are fibro glass wire-reinforced, fiberglass-reinforced, APP (Atactic Polypropylene) additive, both sides polyethylene film coated and obtained by saturating carrier with bitumen asphalt. F-2 Fibro glass water Isolation membrane is used generally in roofs, pergola and Isolation points requiring water Isolation.
Isolation Membrane Areas of Uses
Isolation membrane is used in TOKİ, KİPTAŞ, project basic screen Isolation and bundling Isolation, sloping roofs of parking area and terraces of projects, tile and ceramic substrate Isolation. Balcony, flower terrace, garden terrace Isolation. Concrete flumes, rain gutters and hidden creeks. Some projects basement retaining walls, sewage treatment plants and pressure groundwater projects. Water tank Isolation. Ponds, swimming and ornamental pools.
Isolation Membrane Product Benefits
Isolation membrane is flexible and durable. It can easily be applied to different types of surfaces in membrane applications for TOKİ and KİPTAŞ projects. Isolation membrane has a high tensile and tear strength. Isolation membrane is resistant to adverse conditions that may occur in the soil. Water Isolation membrane can be easily applied in the details such as dilation, edges of chimney and return of the parapet.
Isolation Membrane Surface Preparation
Surface where Isolation membrane application will be made should be cleaned from loose soil, oil and other chemicals. Surface defects are repaired with Starfix repair mortar. For a healthy application it is advised to use İzopak water Isolation membrane primer bitumen emulsion as a primer to the surface. Surface where Isolation membrane application will be made should be cleaned from loose soil, oil and other chemicals. Surface defects are repaired with Starfix repair mortar. For a healthy application it is advised to use İzopak water Isolation membrane primer bitumen emulsion as a primer to the surface.
Bituminous Water Isolation Membrane Application Detail
Bituminous Isolation membrane Isolation is applied by 10 cm or 15 cm ride side by side from joints. In roll finishing points 15 cm space is made and bituminous water Isolation membrane is adhered to entire surface with oxyacetylene torch fully by heating.
Storage of Bitumen Water Isolation Membrane and Issues to be considered
Isolation water membrane rolls should not be stored upright. Membrane rolls should be protected from direct sunlight. After Isolation application finished no piercing and cutting process can be performed. In walked terraces where Isolation membrane is applied it should be protected with floor coatings.
|PRODUCT TECHNICAL SPECIFICATIONS:|
|Fittings Type:||FİBRO GLASS|
|Fitting Weight:||> 50 g / m2|
|Roll Size:||1 X 15M|
|Upper Coating:||PE FILM|
|Bottom Coating:||PE FILM|
|Water Resistance:||100% Waterproof|
|Palet Ölçüsü :||120 X 100 X 110|
|Pallet Dimensions:||20 Pallets|
|Container Number of Pallets:||26 Pallets|
|PRODUCT QUALITY STANDARDS:|
|ITEM NO:||04.626/01 A 01|
|TS NO:||TS EN 13707|
|ISO NO:||CE 13707|
|You can download our||Certificates Here.|